Wheels & tyres - Bigger wheel fitment consideration

Predominantly 13-inchers, but 12s as well, the main thrust of the questions being 'what do I need to do?'

This subject is a regular visitor to the message board and 'Knowledge' section of Mini Magazine for whom I write - fitting bigger wheels. Predominantly 13-inchers, but 12s as well, the main thrust of the questions being 'what do I need to do?' along with 'which wheel arch extensions will I need?' The answer has always been somewhat 'clipped' purely because of the space availability issues both in the magazine and on the message board, so something a little more detailed was required. Although the Mini suspension was designed around the use of 10-inch wheels with cross-ply tyres, a quick dash through history reveals that fitment of these bigger wheel sizes isn't a recent, 'modern' application.

My own Twin point by Keith Dodd 1st June 2006

Having now covered 17000 miles in my twinpoint from new it developed bad oil leaks making it a true mini. The rocker cover seals perished along with a diff output shaft seal. The leaks now rectified, Duckhams oil was used to refill the engine.

My own Twin point by Keith Dodd 1st June 2006 making it a true Having now covered 17000 miles in my twinpoint from new it developed bad oil leaks mini.

My own Twin point by Keith Dodd 1st June 2006

Having now covered 17000 miles in my twinpoint from new it developed bad oil leaks making it a true mini. The rocker cover seals perished along with a diff output shaft seal. The leaks now rectified, Duckhams oil was used to refill the engine.

My own Twin point by Keith Dodd 1st June 2006 making it a true Having now covered 17000 miles in my twinpoint from new it developed bad oil leaks mini.

Dunlop Suspension

MiniTech News - Nov 1992 - CONTENTS

Nov 1992 Minitech News Contents

MiniTech News - Nov 1992 - CONTENTS

Nov 1992 Minitech News Contents

Historical Article-August 1994-Steady Eddy

Steady Eddy My first visit to Mini Spares must have been over 12 years ago and while buying the usual go faster bits, I enquired about a Saturday job. A very lean and handsome Keith Calver could only offer me full time employment. I declined and subsequently have spent a small fortune over the years and drunk far too many pints of beer with K.C.

Historical Article-August 1994-Steady Eddy

Steady Eddy My first visit to Mini Spares must have been over 12 years ago and while buying the usual go faster bits, I enquired about a Saturday job. A very lean and handsome Keith Calver could only offer me full time employment. I declined and subsequently have spent a small fortune over the years and drunk far too many pints of beer with K.C.